Description
Made with high grade premium quality timber throughout including roof and floor (no chipboard or OSB). the Power 10’x6′ Overlap Timber Pent Shed uses 10mm extra thick rustic looking overlap cladding.
The shed can be installed how you want it by allowing you to choose whether to place the doors on the high or low side. All sheds have high grade premium quality timber throughout including roof and floor.
Power Sheds do not use chipboard or OSB unlike many other manufacturers .The Power Pent Shed uses 10mm extra thick rustic looking overlap cladding that is responsibly sourced .
Lock and key, full fixings and instructions included as standard. The shed features include a heavy duty 28x28mm framing with which double to 56x28mm framing for increased strength, galvanised rust resistant ironmongery, and advanced wood preservative for increased protection. High performance polyester roofing felt is used which makes the shed last longer.
A high grade and highly recommended premium quality timber shed at an affordable price that comes complete with a 10 Year Manufacturers Warranty
WINDOW SIZE (if applicable)
457x610mm
DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm
Shed Base Preparation
You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.
The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.
If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).
Optional Timber Base (chargeable)
This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.
Each base section matches each floor panel perfectly to make assembly easy.
Delivery
The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.