Sale!

Power 10’x6′ Tongue and Groove Timber Apex Shed (window or windowless) (single or double door)

Original price was: £1,035.99.Current price is: £888.99.

High quality, extra strong, Scandinavian Pine
Highly adaptable modular configuration
Heavy duty framing with corner bracing on all wall panels
Plenty room inside with high eaves
Tongue and Groove throughout including roof and floor
Modular shed allows you to put the doors and windows where you want as you assemble the building.
10 Year Manufacturer’s Warranty against rot, decay or infestation
Diagonal framing on walls and door for extra strength and longevity
Windowless option available at no additional charge
Long-lasting Golden Oak preservative treatment (inside & out)
Double size heavy duty framing on walls and at corners
16mm nominal (12mm finish) tongue & groove roof, walls & floor
3x zinc galvanized T-hinges on each door
Pre-fitted internal lock with key (no padlock required)
Full instructions and fixings are included.

Fast Delivery (see additional information)

 

In stock

Do you require windows on your shed? See specifications for number of windows included
Do you require your shed to feature a single door or a double door?
Do you require a timber base for your shed?
Installation of Shed- Please check below for further information. Please ensure if you wish for the base to be installed that it is purchased above.
Product total £888.99
Options total £0.00
Grand total £888.99

Description

A Timber Garden Shed  that is made to last! The world’s most adaptable shed, the Power 10’x6′ Tongue and Groove Timber Apex Shed , can be configured how you want by allowing you to place the doors and windows in any position on any side, which you can do as you assemble it. Power Sheds have redefined the garden shed.

Manufactured in the UK Powersheds are made from the finest European slow grown sustainable timber. Each shed is made from 12mm thick tongue and groove timber. Even the floors and roofs are tongue and groove to give extra strength and durability. Arrange this shed how you want as you assemble it. Power adapts to your garden and may be the last shed you’ll ever have to buy.

All sheds in this range offer a taller than standard head clearance, with timber corner bracing for extra rigidity, roof truss supports to prevent future roof sag and galvanised ironmongery. Your shed will stand the test of time for many years to come.

Power sheds feature 12mm thick tongue and groove joints throughout their build and when the panels are assembled the corners become double thick to further strengthen the frame.

Fully protected from the elements, the advanced exterior wood preserve means the strong protective wax coating protects the shed for a whole year before re-treating is required.  It is also easy to paint over if you did so wish.

The toughened glass windows come pre-beaded and fitted to ensure your safety, along with stylish PVC window sills to prevent any water ingress.

The roof is fitted with ‘Super Felt’ – An advanced high-performing waterproof felt with polyester backing to ensure longevity and tear resistance.

Security is a very important factor that has not been left out. Power equips their sheds with either a press lock and key or in the case of the Power Security model, a 5 pin double-locking cylinder with 50mm strong bolt.

 

WINDOW SIZE (if applicable)
457x610mm

DOOR SIZE
Single – 750x1630mm
Double – 1034x1630mm

Shed Base Preparation

You will need a firm and level base for the shed to go on. The shed comes with a T&G floor with floor joists on the underside to lift the building off the ground, but you will still need something firm and level for it to go on. This can be concrete, paving slabs, timber bearers or any other suitable firm and level base. If you have any questions on bases then please get in touch. Some silicone around the windows on the outside would also be beneficial.

The base is slightly smaller than the external measurement of the building, i.e. the cladding should overhang the base, creating a run for water. It is recommended that the floor is at least 25mm above the surrounding ground level to avoid flooding.

If you have not chosen to purchase our Power Base then other suitable bases would include a concrete base or a paving slab base (slabs laid on top of 50mm of sharp sand).

Optional Timber Base (chargeable)

This base is made from 90x50mm pressure treated timber bearers. It is a kit which requires self assembly but comes with the instructions and fixings required to screw it together.

Each base section matches each floor panel perfectly to make assembly easy.

Delivery

The shed will arrive on a pallet delivered by our trusted courier. It will be delivered on an 18ton vehicle and a tail lift / pallet truck will unload the pallet. If there are any access problems for an 18ton vehicle (similar to the size of a bin wagon) then please advise us when placing the order so we are able to make alternative arrangements.

You may also like…